For temperatures not lower than 18°C

The BTS 90 manually operated sliding door (door thickness 90 mm) can be used for refrigerated rooms where the temperature is constant and is not below -18°C.
The BTS 90 model is equipped with an internal and external lever handle to facilitate opening (on large doors).

They are equipped with perimeter and base heating elements to prevent ice formation and allow the seals to be effective at all times. The (high-power) heating elements are not inserted inside the seals, but are built into the door structure and the omega floor edge (to increase heat transmission).

In addition, this two-element system allows double interruption of the thermal bridge in the floor area, which is normally the most delicate part as it is the point where ice is most likely to form.

Optional fittings are available on request, depending on the environment in which the door will be used and the customer’s needs.
• PVC frame cladding with stainless steel and 20/10 stainless steel;
• only one stainless steel or plastic-coated zinc sheet panel in one of the available colours;
• supply of stainless steel connecting sheets.

If the door is installed under special environmental conditions and if there is a raised panel inside the room (forming a step between the door and the outside of the room), it is possible to create a raised threshold of the desired thickness, which can be used by the customer to install a ramp to access the room.

Technical Specifications

door panels in plastic-coated zinc sheet metal similar to RAL 9016 or other colours (on request also available in AISI 304 stainless steel or GRP);

pad thickness 90 mm

door frame silver-anodised aluminium (on request also covered with AISI 304 stainless steel);

door injected with 40 kg/mc polyurethane foam;

upper rail in galvanised steel, bent and painted similar to RAL 7001 (on request also in AISI 304 stainless steel);

Teflon wheels (cut from solid material) and anti derailment system with bearings;

safety hook to prevent pad falling;

lower guide in silver-anodised aluminium (on request also in AISI 304 stainless steel);

perimeter and lower seal in closed-cell foam rubber;

food-safe shockproof PVC frame in white similar to RAL 9016 (on request also covered in AISI 304 stainless steel or entirely in AISI 304 stainless steel);

duoble 30V 30W/M heating elements: 1 perimetral heating element and 1 omega floor edge element;

connecting plates and rail covers in plastic-coated zinc plate similar to RAL 9016 (on request also in AISI 304 stainless steel);

stainless steel hardware and fasteners;

external handle made of stainless steel, internal handle made of galvanised steel and covered in black rubber;

Download Data Sheet

Need more informations?

If you need pre-sales information of a commercial nature or if you need technical advice, our staff is at your disposal!