For temperatures not lower than -25°C

The Hinged Door mod. BTC 120 (door thickness 120 mm) can be used for refrigerated rooms where the temperature is not below -25°C.

Made with high-quality components that allow the door to be adjusted with minimal effort.
The door handle is supplied as standard with a key and internal release system to enable exit even if the door is locked.

The doors are available in zinc-plasticised sheet metal (various colours), in stainless steel with ScotchBrite finish or in fibreglass.

They are equipped with perimeter and base heating elements to prevent ice formation and allow the seals to be effective at all times. The (high-power) heating elements are not inserted inside the seals, but are built into the door structure and the omega floor edge (to increase heat transmission).

In addition, this two-element system allows double interruption of the thermal bridge in the floor area, which is normally the most delicate part as it is the point where ice is most likely to form.

Optional fittings are available on request, depending on the environment in which the door will be used and the customer’s needs.
• PVC frame cladding with stainless steel and 15/10 stainless steel;
• only one stainless steel or plastic-coated zinc sheet panel in one of the available colours;
• supply of stainless steel connecting sheets.

If the door is installed under special environmental conditions and if there is a raised panel inside the room (forming a step between the door and the outside of the room), it is possible to create a raised threshold of the desired thickness, which can be used by the customer to install a ramp to access the room.

Additional accessories are also available to enhance the functionality of the door:

  • Doorstop with slowdown and extended approach system;
  • Internal panic exit bar (with 1 or 3 locking points) with stainless steel tube and external handle with key;
  • PUSH BAR panic exit device (with 1 or 3 locking points) with external handle with key;
  • Electric lock with the possibility of bedge connection or remote opening;
  • Square porthole (or desired size) with safety glass.

Technical Specifications

door panels in plastic-coated zinc sheet metal similar to RAL 9016 or other colours (on request also available in AISI 304 stainless steel or GRP);

pad thickness 120 mm

door frame silver-anodised aluminium (on request also covered with AISI 304 stainless steel)

door injected with 40 kg/mc polyurethane foam;

adjustables ramp hinges

perimeter and lower seal in closed-cell foam rubber;

food-safe shockproof PVC frame in white similar to RAL 9016

duoble 30V 30W/M heating elements: 1 perimetral heating element and 1 omega floor edge element;

connecting plates and rail covers in plastic-coated zinc plate similar to RAL 9016

lock with key and internal release;

Download Data Sheet

Need more informations?

If you need pre-sales information of a commercial nature or if you need technical advice, our staff is at your disposal!